Skip to content
English - Canada
Support Form
Remote Support
  • There are no suggestions because the search field is empty.

ETS L5300 Terminal Setup

* Some PCs do not have TLS 1.2 enabled (especially Windows 7). Download and run this script to enable TLS 1.2 in the registry.

https://www.etsemoney.com/DOCSSEC/Downloads/EMTransVault/EnableTLS12.zip

 

For clubs using ETS' L5300 terminals there is no software to install on the POS client computer. This terminal must be IP connected (cannot be USB or Serial connection)

 

The following should appear on terminal information screen when it is booting:

  • Terminal Type - L5300-PCI3 (first line on screen)
  • FPE version 7.u.542 (second line on screen)
  • Firmware 5P00.0054002

 

ETS will need to set up the necessary terminal IDs and ensure the required Transvault core files are assigned to each account before the course will be able to use the new version of POS.

Transvault version should be 1.1.6095.20573_AnyCPU_4.0.30319

 

 

To Configure the Terminal

  1. Plug in the Ethernet cord and plug the terminal into a power outlet to power it up.
  2. When you reach a screen with "EQUINOX" at the top and a blue "Setup" button at the bottom right, quickly press the blue "Setup" button. If you don't press it quickly enough you will have to reboot and try again.
  3. Enter password multilane and press "Enter"
  4. Press "Setup" button.
  5. Press "ECR Port" Button.
  6. Select "TCP/IP Client" and then press the blue box on the right of the screen with ">>".
  7. Enter the IP address of the computer that this terminal will be paired with. (the computer must be configured with a static IP).
  8. Set the Port to5110and uncheck "Use TLS"
  9. Click the "Apply Now" button.
  10. On the setup menu press the "Network" button.
  11. Select "Ethernet" and press the blue button on the right of the screen with the ">>".
  12. Beside "Ethernet settings" ensure that the "Use DHCP" box is selected and then press "Apply Now".
  13. On the Setup Menu screen press the "EXIT" button.
  14. On the Main Menu screen press the "Exit" button.
  15. You should see a Connection to ECR on the screen. When completed the screen will sit at white screen until you attempt to connect to the terminal.
  16. To configure the integration login to the Point of Sale client. Then click on "ADMIN"
  17. Click on the "Payment Terminal" button.
  18. Check the box beside "This register has an integrated payment terminal".
  19. From the Terminal Type dropdown choose "ETS" then click the "ETS Config" button at the bottom right of the window.
  20. Merchant Type does not matter.
  21. ETS will provide you with the Merchant ID, Merchant Name, Client ID, Master Key, and Terminal ID.
  22. Pay by Card URL https://pos.etsemoney.com/POSCP4/main.asp
  23. Terminal - Select "Hypercomm_Equinox"
  24. Model - Select "L5300"
  25. Comm Method - Select "IP"
  26. Card Reader - choose "None"
  27. IP Address - Put in IP address of this computer (POS Clients that use these terminals must have their IP address set to Static).
  28. Port # - should match port number used when setting up the terminal (default is 5110).
  29. COM Port - Leave blank.
  30. Check the box beside "Signature Capture" to indicate that you want the terminal to prompt the user for a signature. (If you do not want the customers to sign on the terminal and would like them to sign on your receipt then you will need to contact ETS and let them know that you do not want the terminal to prompt for signature and then you can uncheck the box beside "Signature Capture")
  31. Click "OK" and then click "Test Connection".
  32. After about 10-20 seconds a message should appear letting you know the connection was successful and the terminal should now display the blue EMONEY screen with powered by ETS underneath. 

* If you want a terminal to prompt customers for gratuity, you will need to contact ETS and ask them to turn this option on to prompt for gratuity for that terminal 

* If the terminal does not go to the blue EMoney screen when you attempt to connect to the terminal and remains on the white screen with the bar across the bottom, this means something is wrong with the configuration. At this time you need to ensure that the network cables are properly connected and that all ETS configuration fields are filled in properly. May need to contact ETS to get past this white screen.

(For clubs using POS versions before 2017.0.00 use the following steps for configuring your L5300 terminal)

 

To Configure the Terminal

  1. Plug the terminal to power it up.
  2. When you reach a screen with “HYPERCOM” at the top and a blue “Setup” button at the bottom right, quickly press the blue Setup button. If you don’t press it quickly enough you will have to reboot and try again.
  3. Enter password MULTILANE and press "Enter".
  4. Press “Setup” button.
  5. Press “ECR Port” Button.
  6. Press TCP/IP Client and then press the blue box on the right of the screen with “>>”.
  7. Enter the IP address of the computer that this terminal will be paired with. (the computer must be configured with a static IP)
  8. Leave the Port as 5110.
  9. Click the “Apply Now” button.
  10. On the setup menu press the “Network” button.
  11. Select “Ethernet” and press the blue button on the right of the screen with the “>>”.
  12. Beside Ethernet settings select the box beside use DHCP and then press “Apply Now”.
  13. On the Setup Menu screen press the “EXIT” button
  14. On the Main Menu screen press the “Exit” button.
  15. You should see a Connection to ECR on the screen. The terminal should reboot on its own but usually does not. If the terminal does not reboot itself than unplug the terminal and plug back in to force a reboot.
  16. When the terminal finishes rebooting it should display the course logo. If not the terminal must first be configured properly. You will need to call ETS.
  17. To configure the integration, login to the Point of Sale client. Then click on “ADMIN” and then click on “CONFIG”.
  18. Click on the “Payment Terminal Config” button.
  19. Check the box beside “This register has an integrated payment terminal”.
  20. From the Terminal Type dropdown choose “ETS” then click the ETS button at the bottom of the screen.
  21. ETS will provide merchant type, Merchant ID, Merchant Name, Client ID and Master Key.
  22. Note: Only merchant type of Restaurant will prompt for gratuity.
  23. Terminal ID is not required.
  24. Pay by Card URL https://pos.etsemoney.com/POSCP4/main.asp
  25. Terminal - Select “Hypercomm_Equinox”
  26. Hypercom Model – Select “L5300”
  27. Comm Method – Select “IP”
  28. Card Reader – choose “None”
  29. IP Address – Put in IP address of this computer (POS Clients that use these terminals must have their IP address set to Static.
  30. Port # - should match port number used when setting up the terminal (default is 5110)
  31. COM Port – Leave blank.
  32. Click "OK" and then click “Test Connection”
  33. Restart the POS Client.